Search BENLEE

Lugger Truck

Back to Product Line

Specs  Request Quote 


BENLEE Lugger Truck

Features
• ALL CYLINDER RODS ARE CHROME PLATED
• CYLINDERS HAVE REMOVABLE HEAD GLANDS FOR EASE OF SERVICING
• UNIT SHELL COMPONENTS SUCH AS SIDE PANELS, ARM PANELS AND FLOOR SHEET ARE MADE OF ASTM A572 Gr50.
• JACKLEG CYLINDERS USE LINKS TO KEEP THEM IN PLACE NOT "FREE SWINGING" STYLE (STANDARD ON ALL UNITS OVER 20,000# CAPACITY).
• JACKLEG CYLINDERS ARE MOUNTED WITH ROD END UP INTO JACKLEG HOUSING TO PROTECT THE ROD.
• ALL UNITS 40,000# CAPACITY AND OVER HAVE HI-FLOW HYDRAULIC COMPONENTS FOR FASTER CYCLE TIME.
• TAIL LIGHTS ARE LOCATED IN JACKLEG HOUSING TO MEET WITH FMVSS 108 REQUIREMENTS.
• AIR PREATHER FILTER ON HYDRAULIC TANK AND 10 MICRON RETURN LINE FILTER.
• HYDRAULIC VALVE IS AIR ACTUATED WITH IN-CAB CONTROL LEVERS.
• ARM CYLINDERS AND LOWER LOAD SHAFT USE ALUMINUM/BRONZE (CA-954) BEARINGS, NOT SAE 660 BRONZE.
• USING CA-954 BEARINGS ALLOWS FOR HEAVIER LOADS AND LONGER BEARING LIFE.
• SUCTION STRAINER PROVIDED IN OIL TANK.
• STANDARD CENTER FLOOR MOUNTED TRIP HOOK FOR "DUMPING" LOAD IS AIR OPERATED.
• UPPER SHAFT SADDLE BLOCKS HAVE ALUMINUM/BRONZE BEARINGS.
• LOWER ARM PIVOT, "PINNED" TO LOWER LOAD SHAFT, NOT CLAMPED.
• HYDRAULIC SYSTEM PRESSURE IS 2500 PSI, AND SUPPLIED WITH A DIRECT MOUNTED GEAR PUMP.
• ALL UNITS PLUMBING SUPPLIED WITH HYDRAULIC TUBING AND SAE 37 DEGREE (JIC) FITTINGS.
• LUGGER SUBFRAME LONGMEMBERS ARE 10" @ 15.3# STRUCTURAL CHANNEL WITH 4" @ 5.4 STRUCTURAL CHANNEL CROSS MEMBERS.
• UNIT FLOOR IS 3/16" THICKNESS A572 Gr50 50,000 PSI YIELD MATERIAL FOR 30,000# AND OVER CAPACITY.
• UNIT FLOOR IS 1/4" THICKNESS A572 Gr50 50,000 PSI YIELD MATERIAL FOR 40,000# AND OVER CAPACITY.
• REAR FORMED APRON IS 5/16" THICKNESS ASTM A572 Gr50, 50,000 PSI YEILD MATERIAL.
• UNIT ONE PIECE SIDE PANEL/CYLINDER HOUSING IS 5/16" THICKNESS ASTM A572 Gr50 50,000 PSI YEILD MATERIAL FOR 30,000# AND LESS CAPACITY.
• UNIT ONE PIECE SIDE PANEL/CYLINDER HOUSING IS 3/8" THICKNESS ASTM A572 Gr50 50,000 PSI YEILD MATERIAL FOR 40,000# AND LESS CAPACITY.
• HYDRAULIC HOSES RATED 3,000 PSI
• SANDBLAST, PRIME AND PAINT 3 PART POLYURETHANE
• LED LIGHTS
• OTHER MODELS AND CAPCITIES AVAILABLE BASED ON CUSTOM APPLICATION AND CUSTOMER REQUIREMENTS.

Options

  • Tarping System
  • Auto Infltion
  • "J" Hooks
  • "In-Arm" Contact Pins
  • Inside Cab Controls
  • Tool Box
  • Work Lights
  • Aluminum Wheels
  • Cab Guard on Front of Lugger Bed
  • Cat Walks Over Arm Cylinders

We reserve the right to make changes at any time without notice.